Defence gauging

Convoluted spline gauge

A gauge for inspecting convoluted splines on submarine dive planes while the part is still in the machining centre.

2 → ½days per part
Wirelessdata capture
Convoluted spline gauge

How it works

  1. 01Interchangeable tooling balls at each end measure the peak and trough of each spline.
  2. 02With the part still in the machining centre, the gauge sits between opposing splines.
  3. 03Readings go from a wireless indicator to a host PC and are recorded automatically.
  4. 04Software flags splines that need more machining.
  5. 05Inspection and rework fell from about two days to half a day per part.

Built with

  • DataWireless indicator to PC
  • SoftwareSTT tolerance checking

Need something like this for your line?

Start a project