An automated laminating & labelling station, engineered in-house.
Labels are fed from the reel, peeled and applied automatically, inside a fully guarded cell with touchscreen control. Designed, built, wired and programmed by our team in Pontefract.
Every 3 seconds, a finished tag.
- Feed & markA blank tag rises into the slot and the laser marks it.
- IndexThe pusher moves it on one place, and the tags push each other along the steel track.
- PickThe Z cylinder picks the front tag and carries it across to the applicator.
- Laminate & ejectThe pad presses the laminate on and the finished tag drops out of the front chute.
Label reel unwind
Backing rewind
X–Z applicator slide
Touchscreen HMI
E-stop & controls
Clear guarding
Hinged access door
Every cell is engineered in 3D before a single part is cut.
A concept pick & place cell: a delta robot with vision picks parts from the infeed and places them into trays, inside an aluminium-profile frame. Drag to rotate it.

Our expertise lies in
- Robot & cobot cells
- Pick & place automation
- Assembly lines & stations
- Special purpose machines
- PLC & controls
- Vision inspection
- Leak testing
- Laser marking systems
- Installation & worldwide support
Every machine starts on a screen in our design office.
Drag the line to compare the 3D design with the finished bespoke laser marking workstation: Keyence laser, servo feed table, extraction and integrated PC.

Raw material in one end. Finished parts out the other.
Off-the-shelf equipment is almost right. Our machines are built around your exact part, cycle time and floor space, with the controls written by the same team.
Watch it run.
Our automated XYZ glue gantry laying a consistent bead, part after part. Designed, built, wired and programmed by STT.

We write the code that runs the machine.
Panel design and build, PLC and servo programming, HMIs, safety, vision and data logging, all by our own controls engineers. No subcontracted software, no finger-pointing at commissioning.
One team takes it from sketch to switch-on.





- Step 1: DesignConcepts and 3D models with you, to your precise specification.
- Step 2: PrototypeProve it works in reality, debug and refine before the full build.
- Step 3: Machine & buildParts made in our own machine shop, assembled and wired in-house.
- Step 4: Program & testPLC, HMI and vision programmed and proven before it leaves us.
- Step 5: CommissionInstalled by our engineers, backed by a 12-month warranty.
Machines and tooling for names you know.
- Rolls-Royce
- Unilever
- Kongsberg Automotive
- Harwin
- Siemens
- Omron
- Mitsubishi
- Allen-Bradley
- Keyence
- Festo
- Bosch Rexroth
- Pilz
- Balluff
- Atlas Copco
- Haas
- Citizen
“The shafts have worked well. Thanks for getting these turned around and to us. BMW were impressed as well.”
“Our customer asked us to send their compliments to whoever refurbished the taper blocks. They are excellent.”
“I must commend you on the quality of the workmanship. It shows a high standard of pride of workmanship.”
“The bulkheads and locknuts are fantastic, and actually better than the originals.”
Design office, machine shop and build hall. One building.
Come and see your machine being built. Customers are welcome for design reviews, build progress and factory acceptance testing before anything ships.
Know-how, written by the engineers.



