Readings on paper don’t prove anything.
Handwritten readings and retyped spreadsheets are slow, easy to get wrong and hard to trace back to a part. Gauges drift out of calibration without anyone noticing. The Gauge Data Logger takes the reading straight from the gauge, decides pass or fail, and keeps a record you can rely on.
Three steps on the shop floor.
- 01
Connect your gauges
Up to four digital gauges or indicators plug into the STT 4-port box, which connects to the PC by USB.
- 02
Load a recipe
Each recipe sets which gauges are used, with the nominal and tolerance for every feature. The operator adds the works order, SKU and batch quantity.
- 03
Record every part
One press of Record value reads every gauge at once. Each part shows pass or fail straight away and is added to the part log.

Built by engineers who make gauges.
Recipes
Set up each part once: which gauges, the nominal and the tolerance for every feature. Operators just pick the recipe.
Instant pass / fail
Every reading is compared with its tolerance as it is taken, so a bad part is caught at the bench, not at the customer.
Full traceability
Each part is stored with the time, the operator, the works order, the SKU and every reading.
Calibration checks
Gauges are checked against a master before use, with the result saved and reminders when a check is overdue.
Charts & export
See results on charts, and export the part log to CSV for your quality system or customer reports.
Users & downtime
Operator and administrator accounts, and a quick way to report downtime from the same screen.
Know your gauges are right before you measure.
Quick calibration reads every channel against a master of known size and shows pass or fail for each one. The operator signs it off with their ID and an optional note, and the result can be exported straight to CSV.


The STT 4-port box.
Designed and built in Pontefract, laser marked with its own serial number and build date. Set it up once in Devices, test every channel with a single click, and it connects automatically from then on.
Need more gauges, a custom report or a link to your system?
We design gauges, fixtures and software in-house, so the Gauge Data Logger can be supplied on its own, built into a bespoke gauge or fixture, or adapted to the way your quality team works.
